Case IH Cam Track Parts

Case / IH Cam Tracks

Case / IH Cam Tracks

Shop by image Download

Inspection, Maintenance, and Cleaning

It is absolutely essential for you to have your Cam tracks inspected periodically. They perform a crucial role in the overall operation of your cotton harvester and can have a serious impact on the profitability of your operation.

The efficiency of your harvester’s cotton pickling operation is dependent on the precise calibration of several moving parts within very small tolerances.
Even a small amount of wear in the cam track assembly resulting from every day use, or dirt or debris build-up can end up costing you a lot of money.

The Cam Track Affects Vehicle Speed and Efficiency

Due to the cam track’s critical effect on the high-speed rotation of the picker bar and the rearward spindle tip motion, it is one of the most critical components in the picking operation and will affect the vehicle’s speed and efficiency.

The cam track rotates the picker bar around the vertical axis to control the spindle tip speed, which in turn facilitates a higher drum speed.

Greater Efficiency with No Damage to Cotton Plants

If the cam is operating correctly, the harvester can pick cotton faster with no damage to the cotton plants.
The cam track also orients the spindles as they rotate around the track. This ensures an optimum angle as the spindle passes by the pressure doors through the picking zone and then under the doffers and moistener pads.

It is vital that the motion of the spindles allows the cotton to be picked cleanly off the spindles, as they are doffed.

Furthermore, the spindles are cleaned as they pass under the moistener pads, ensuring that the cotton is collected quickly and efficiently without binding or clogging the system.
It is vital, therefore, that your cam tracks are in good working order and correctly adjusted.

Should you require any assistance or advice on this vital component, we’re just a phone call away.

You can contact us using the following additional options:

  • Email: [email protected]
  • Fax: 1-712-752-8472
  • Shopping Cart: You can place your order through the links on our website and we will confirm your order via email or get in contact with you to discuss any details that may be unclear.

For your convenience, you can order your parts any time of the day or night.

Assembly Drawings – Part Numbers

Use the link below to quickly access the assembly drawing which you may need to identify part numbers.

18-Spindle Picker Bar Assembly Download

We have a full complement of replacement parts available, including picker bars, cam rollers, bearings, pins, bar journals, thrust washers, retaining rings, spindle assemblies, bottom bar bushings, pivots, and shims.

Ordering the Right Parts is Quick and Easy

It can be incredibly frustrating when opening a parts package, to find that you’ve been sent the incorrect part.

Our job is to make it as easy as possible for you to order and receive the exact part or assembly you need to get your machinery fixed or serviced and back out where it belongs, making you money.

Please provide us with the following information when placing your order:

  • Certi-Pik part number or OEM part number
  • A description of the item 
  • The model number of the machinery you’re fixing

Contact us today for your Case IH Cam Tracks parts.

Comprehensive Inventory in Stock

We carry a comprehensive inventory to ensure that we can supply what you need in the shortest possible time.

Our system to ensure that we don’t run out of those important spares and components that you’re going to need has been developed over many years in business.

We can ship any components from our warehouse that you may require, at a moment’s notice.

Comprehensive Cam Track Parts Available

We stock a full range of specialty items and sheet metal components for use in rebuilding cotton-harvesting equipment. As we fabricate replacement components for the top pickers in the industry, you have access to most everything that you could possibly need to get your machines back in the field.

We supply front and rear cam tracks, supports, spring retainers, slotted spring pins, hex bolts, washers, etc.

Contact Us Now

If you have the time, browse the links to our very extensive list of parts that appear at the bottom of this page.

Alternatively, you’re welcome to give us a call at Certi-Pik USA on our toll-free number, 1-888-CERTIPIK (237-8474), and one of our staff will help you find what you need, right away.

If you need to find a specific part and know exactly what you need right now click the link below for the detailed assembly drawing.

Each part is labeled, making the selection of the items you need for rebuilding or servicing your picking units, quick and easy.

Call Now

Case / IH Cam Tracks

Picking Unit System: Case / IH Cam Tracks 394253A1 (94253A1) for Sale

1 – #94253A1

Description: CAM TRACK – R.H. – FRONT ( WITH ROLLER SERVICE HOLE ) FITS ALL 2000 SERIES – CPX 620-635 MACHINES (USES ITEMS 3-5 : SOLD SEPARATELY) REPLACES PART #1982351C1
OEM Part: 394253A1
Section: Picking Unit System
Case / IH Cam Tracks
Picking Unit System: Case / IH Cam Tracks 394252A1 (94252A1) for Sale

2 – #94252A1

Description: CAM TRACK – L.H. – REAR ( WITH ROLLER SERVICE HOLE ) FITS ALL 2000 SERIES – CPX 620-635 MACHINES (USES ITEMS 3-5 : SOLD SEPARATELY) REPLACES PART #1982350C1
OEM Part: 394252A1
Section: Picking Unit System
Case / IH Cam Tracks
Picking Unit System: Case / IH Cam Tracks 394414A1 (94414A1) for Sale

3 – #94414A1

Description: SUPPORT – CAM ROLLER ACCESS – USES 2x 5/16″ BOLTS – FITS CAMTRACKS 94252A1 & 94253A1
OEM Part: 394414A1
Section: Picking Unit System
Case / IH Cam Tracks
Picking Unit System: Case / IH Cam Tracks 492-11031 (00303P) for Sale

4 – #00303P

Description: WASHER – 5/16″ LOCK
OEM Part: 492-11031
Section: Picking Unit System
Case / IH Cam Tracks
Picking Unit System: Case / IH Cam Tracks 413-58 (0041358P) for Sale

5 – #0041358P

Description: BOLT – 5/16 – 18 X 1/2″ HEX HEAD GD5 – FITS CAMTRACKS 94252A1 & 94253A1
OEM Part: 413-58
Section: Picking Unit System
Case / IH Cam Tracks
Picking Unit System: Case / IH Cam Tracks 216138C2 (16138C2) for Sale

6 – #16138C2

Description: SUPPORT – CAM ROLLER ACCESS – FITS CAMTRACKS 1982351C1 & 1982350C1
OEM Part: 216138C2
Section: Picking Unit System
Case / IH Cam Tracks
Picking Unit System: Case / IH Cam Tracks 1994932C1 (94932C1) for Sale

7 – #94932C1

Description: PLATE – SPRING RETAINER – FITS CAMTRACKS 1982351C1 & 1982350C1
OEM Part: 1994932C1
Section: Picking Unit System
Case / IH Cam Tracks
Picking Unit System: Case / IH Cam Tracks 38-1916 (0381916P) for Sale

8 – #0381916P

Description: PIN – 9/64 X 1″ SLOTTED SPRING PIN (REPLACES 25954R1)
OEM Part: 38-1916
Section: Picking Unit System
Case / IH Cam Tracks
Picking Unit System: Case / IH Cam Tracks 19H1813 (01813P) for Sale

9 – #01813P

Description: BOLT – 5/16 X 5/8″ HEX HEAD GD5
OEM Part: 19H1813
Section: Picking Unit System
Case / IH Cam Tracks