John Deere 9935, 9960-9965
In-line Front & Rear Pressure Plate Assembly

John Deere 9935, 9960-9965 In-line Front&Rear Pressure Plate Assembly

Cotton-picking machines have parts as big as the doors and metal plates to as small as a nut or pin. The In-Line front and rear pressure plate assemblies are areas where one might find parts that may fail and need replacement. There is a diagram linked here which shows different pieces that make up the In-Line front and rear pressure plate assembly. You will find these In-Line aftermarket parts available as needed to fit your John Deere harvester.

Aftermarket parts are generic to the OEM style but match up perfectly. Dealers find them easy to sell, and farmers are pleased, knowing they do not have to wait days or weeks for the parts to come in.

Maintenance will keep the parts in service for only so long until the wear and tear sets in place. All machine parts need replacement eventually, like the pressure plates, and knowing the harvest delay will not be a significant factor leaves the farmers feeling confident.

Learn More

The Parts of the In-Line Front and Rear Pressure Plate Assembly

When the parts are needed, Certi-Pik, USA has everything in stock, so the farmer can focus on the piece that needs replacement instead of the whole assembly. The wait time for the components is minimal once they are ordered. If the part is ordered in the morning, by the evening, it’s on its way to being shipped out to the farmer or dealer.

Certi-Pik, USA is held near and dear to the dealers too. The dealer will mark up the cost to make their profit, but the farmer knows they can get the part for the pressure plates with no trouble. All these parts are available to purchase when issues arise with the In-Line front and rear pressure plate assembly.

Nuts, Bolts, and Washers

The nuts, bolts, and washers are sold separately when the farmers or dealers need them. Here are the nuts, bolts, and washers:

Learn More

Having Everything in Stock

All of the parts and accessories are found in the Certi-Pik, USA warehouse. The pieces match up, so no drilling is required, and no headaches with interchangeable components that don’t fit. In-Line and Pro parts are stocked up along with CTX doors, and cutting-edge, high-quality parts. The significant parts are available, along with accessories like hardware, extensions, scrapping plates, and springs.

When harvest time is near, the farmers will test the equipment. Everything may run fine until the load is put on the machinery out in the fields. Lousy luck, operator error, or faulty maintenance can cause these parts to fail. Wasted time means a loss of money, so at Certi-Pik, USA we strive to have parts for this area of your equipment available and more, when the components fail.

In-Line Pressure Door Angle
R.H. Torsion Spring
Front L.H. Torsion Spring
Hinge Pin
The Pin Kit has a Pin, a Spring, and a Snap Ring.
Spring
Snap Ring
Front and Rear Pressure Plate
Rear Link Chain Adjustment Bolt
Spring Lock Pin
Scrapping Plate

Front Support Extension
Rear Extension
Front Extension
Front and Rear Extension Clamp Angle
Front and Rear Plastic Extension
Pro and In-Line Reinforcement Pressure Plate 18S and 20S Plate
CTX ExtenDoor Single Pik Pressure Plate Front and Rear (In-Line) Replacing the OEM #AN193029. Note: This door uses 3x Scrapping Plates.
CTX 5-Spindle Scrapping Plate includes attaching hardware, 2 nuts, and bolts.

Ordering from Certi-Pik, USA

When your cotton-harvesting machinery breaks, locating the part numbers for the faulty components can save time. The part numbers are sometimes found on the part. Optionally: reference our catalog, contact a dealer, or look in your user manual to find one. When the part number is found, the part can be ordered via e-mail or phone. Certi-Pik, USA supplies many dealers and end users with the highest quality parts available. Having the part number on hand can eliminate time wasted on getting the wrong part because some parts look the same even though they are different. Only the part number can separate them.

JOHN DEERE 9935, 9960-9965 IN-LINE FRONT & REAR PRESSURE PLATE ASSEMBLY