JD Miscellaneous Parts

We strive to produce the parts which will be the most needed in keeping your harvester operating at its peak performance. As you might expect, there are a number of miscellaneous parts which are found in unique areas of the cotton harvester that do not merit an entire page in our catalog, thus the ‘Miscellaneous Parts’ page. These parts in addition to the others we supply are required to keep your John Deere machinery running efficiently, and if any one of these parts becomes worn or somehow damaged, it’s likely to put a serious halt on your operations. When you do need to order these parts, you should remember to use either the Certi-Pik USA part number or the OEM part number, so you can be sure of receiving the correct part that you need for your machinery.

When mistakes are made in ordering parts, there’s always a delay involved, because then the correct part will have to be sent out, and the incorrect part will have to be packaged and returned to the seller. All this takes time, and when you’re trying to get a harvest in before the weather hits, or when you’re trying to quickly get to market, time is something that’s in short supply.

Miscellaneous Parts for Cotton Pickers and Strippers

The most common miscellaneous parts used in the broad range of cotton harvesting equipment include bearings, spindles, studs, caps, transmission case housings, slip clutches, boots, unit drive bearings, basket fingers, finger grates, clamps for the basket finger grates, channel clamps, bottom drum bearings, drum spindles, Baler wrap guides, bushings, and screens. Whenever ordering any of these miscellaneous parts, we will be able to find exactly what you need as long as you can provide us with either our own part number or the OEM part number for reference.

Cotton Harvester Miscellaneous Parts

Any cotton harvester owner, who needs replacement parts for their cotton picker or cotton stripper, should contact us at Certi-Pik USA for immediate service. We always try to have a good supply of high-quality replacement parts on hand for cotton pickers, because we recognize that they are the top performers in the industry right now, and have high demands on their functionality. There are a few parts that are used interchangeably on both Pickers and Strippers, currently due to these unique situations we have some parts available for cotton strippers, so feel free to inquire if you have cotton stripper needs.

We strive to keep up with the newest technology. Virtually all professional cotton harvesters in the business have quickly become acquainted with the capabilities of the CP690 and the CS690 to accomplish non-stop harvesting. High-powered engines on both of these machines provide upward of 500 hp at peak performance, which will reduce your time in the field to a minimum. Contact us when you have any need at all for high-quality replacement parts for your John Deere equipment.

Why Choose Us?

When you’re looking for reliable parts for your cotton harvesting machinery, we realize you have several possible suppliers whom you could contact. However, we honestly feel that we are the most reliable replacements parts company in the country, and reliability is something that should be important to all cotton harvesters.

When you have cotton which is ready to be picked in the fields, you can’t afford delays of even a day or two, because weather may interfere and degrade your crop significantly. If your machine is down because it has a non-operational part, you need to have the right part immediately and it has to be a high-quality part, so it doesn’t immediately break down again.

That’s where we come in at Certi-Pik USA. We have worked with customers all over the globe ever since 1988, and we have provided the best replacement parts for all the top cotton pickers in the industry. Not only do we sell a full range of specialty items, but we can provide the parts you need when you’re undergoing a rebuilding operation on one of your major pieces of equipment. Even if you’re just replacing a few parts, we are still available to help you, and you can be sure you’re getting high-quality parts that won’t fail prematurely under intense operation.

John Deere Cotton Picker Miscellaneous Parts

Please select your part from the following section assemblies

John Deere Miscellaneous Parts

JD Miscellaneous: John Deere Miscellaneous Parts AN111537 (11537P) for Sale

1 – #11537P

Description: BEARING – DRUM BEARING, 9910-9965 CONV.& IN-LINE
OEM Part: AN111537
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N193645 (93645) for Sale

2 – #93645

Description: SPINDLE – PICKER BAR DRUM, 9900-9965 W/O LUBE
OEM Part: N193645
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts AN111582 (11582) for Sale

3 – #11582

Description: STUD – PICKER BAR DRUM, 9900-9910 W/ LUBE HOLE
OEM Part: AN111582
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N118641 (18641) for Sale

4 – #18641

Description: CAP – QUILL – GEAR BOX CAP
OEM Part: N118641
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N197405 (97405) for Sale

5.1 – #97405

Description: HOUSING – TRANSMISSION CASE ( 9935, 9960-9965 IN-LINE & CONV. )
OEM Part: N197405
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N190430 (90430) for Sale

5.2 – #90430

Description: HOUSING – TRANSMISSION CASE (9940, 9950)
OEM Part: N190430
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N199180 (99180) for Sale

6 – #99180

Description: JD – SLIP CLUTCH (SOLD IN PAIRS ONLY) LOWER GEAR CASE = ALL 9935, 9960 – CP690: CONV, IN-LINE & PRO UNITS, UNIT DRIVE = 9910 – 9950 , ( 2x 99180 = 1x AN274314 )
OEM Part: N199180
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N195342 (95342) for Sale

7 – #95342

Description: BOOT – 9950 COUPLER COVER, BLACK RUBBER
OEM Part: N195342
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts AN110820 (10820P) for Sale

8 – #10820P

Description: UNIT DRIVE BEARING – (9900-9930)
OEM Part: AN110820
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts 93203 (93203) for Sale

9 – #93203

Description: BASKET FINGER – REPLACEMENT ARM ( 16 INCH ) 9960-9976 (112 PCS USED ON ASSEMBLY # AN276456)
OEM Part: 93203
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N129922 (29922) for Sale

10 – #29922

Description: FINGER GRATE – BASKET – 9986 – (ALSO FITS COTTON STRIPPER MODELS: 740, 7440, 7445, 7450, 7455, 7460, CS690)
OEM Part: N129922
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N129427 (29427) for Sale

11 – #29427

Description: CLAMP – BASKET FINGER GRATE – 9986 – (ALSO FITS COTTON STRIPPER MODELS: 7440, 7445, 7450, 7455, 7460, CS690)
OEM Part: N129427
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N373378 (73378) for Sale

12 – #73378

Description: FINGER GRATE – BASKET – 9996
OEM Part: N373378
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N382159 (82159) for Sale

13 – #82159

Description: FINGER GRATE – BASKET ( 7760-CP690 )
OEM Part: N382159
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N382449 (82449) for Sale

14 – #82449

Description: CHANNEL CLAMP – BASKET FINGER GRATE ( 7760-CP690 )
OEM Part: N382449
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts AN272787 (72787P) for Sale

15 – #72787P

Description: PRO – BOTTOM DRUM BEARING – PREMIUM QUALITY (9935, 9970, 9976, 9986, 9996, 7760, CP690)
OEM Part: AN272787
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N273309 (73309) for Sale

16 – #73309

Description: PRO – DRUM SPINDLE – STEEL (9935, 9970, 9976, 9986, 9996, 7760, CP690)
OEM Part: N273309
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts KK31825 (31825) for Sale

17 – #31825

Description: JD BALER – WRAP GUIDE – SMALL SIZE – PLASTIC (.062 THICK) 7760-CP690 (2 USED/MACHINE) REPLACES N383021
OEM Part: KK31825
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts KK31824 (31824) for Sale

18 – #31824

Description: JD BALER – WRAP GUIDE – MEDIUM SIZE – PLASTIC (.062 THICK) 7760-CP690 (2 USED/MACHINE) REPLACES N400244
OEM Part: KK31824
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts KK31823 (31823) for Sale

19 – #31823

Description: JD BALER – WRAP GUIDE – LARGE SIZE – PLASTIC (.062 THICK) 7760-CP690 (3 USED/MACHINE) REPLACES N383019
OEM Part: KK31823
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N381641 (81641) for Sale

20 – #81641

Description: JD BALER – WRAP GUIDE – EXTENSION – STEEL – 3 FINGERS
OEM Part: N381641
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N381904 (81904) for Sale

21 – #81904

Description: JD BALER – WRAP GUIDE – EXTENSION – STEEL – 5 FINGERS
OEM Part: N381904
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N381623 (81623) for Sale

22 – #81623

Description: JD BALER – WRAP GUIDE – EXTENSION – STEEL – 6 FINGERS
OEM Part: N381623
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N279871 (79871) for Sale

23 – #79871

Description: BUSHING – INSERT , BAR SEAL – PRO DRUM HEAD
OEM Part: N279871
Section: JD Miscellaneous
John Deere Miscellaneous Parts
JD Miscellaneous: John Deere Miscellaneous Parts N405023 (05023) for Sale

24 – #05023

Description: SCREEN – LID ASSY – BALER 7760-CP690
OEM Part: N405023
Section: JD Miscellaneous
John Deere Miscellaneous Parts
31742

25 – #31742

Description: SHIM – ROCKSHAFT – (.187″ THICK) PICKING UNIT LIFT (9976-CP690) REPLACES #N275626
OEM Part: KK31742
Section: JD Miscellaneous
John Deere Miscellaneous Parts
31743

26 – #31743

Description: SHIM – ROCKSHAFT – (.060″ THICK) PICKING UNIT LIFT (9976-CP690) REPLACES #N275627
OEM Part: KK31743
Section: JD Miscellaneous
John Deere Miscellaneous Parts