Made to fit John Deere 9976-CP770 PRO-16 20S Pressure Plate Assembly

Made to fit John Deere 9976-CP770 PRO-16 20S Pressure Plate Assembly

Many parts of different sizes make up cotton-harvesting equipment. The pressure plate assembly section is one of the many. The diagram linked here shows several different components that make up this pressure plate assembly. Our aftermarket parts are interchangeable with OEM John Deere parts, so our Pro parts are an excellent choice to replace your failed components.

Aftermarket parts we sell meet or exceed OEM standards, so dealers and farmers find them reliable and convenient to sell and purchase. The parts are produced to similar specifications but can have significant cost savings.

Maintenance is still required for all moving parts, and the care of the pressure plates is the same for any other part of the machine. If there are any questions about how to maintain the parts, look into the Owner’s Manual to get the details on how and where to clean or maintain them.

Learn More

The Parts of the Pressure Plate Assembly

Certi-Pik, USA has a good supply of what you need in stock, even the most minor pieces like springs, nuts, and bolts. Farmers do not have to worry about waiting days or weeks to get their parts. The parts are shipped out that afternoon if they are ordered in the morning. This way, no time is wasted when harvest time is in full effect.

Dealers also find value in using Certi-Pik, USA. This allows the farmers to get directly with the company or the dealership. If something happens to the pressure plate assembly, these are some parts that might need to be replaced:

Pressure Plate Reinforcement for Pro and In-Line (Works for the 20S and 18S plates)
Pro 16 20S CTX ExtenDoor Single Pik Pressure Plate. Front and rear replace OEM #AN274593 and AN279558. The door uses scrapping plates #669970 and #669971.
Pro 16 20S CTX ExtenDoor Single Pik Pressure Plate. Rear-only replacement for OEM #AN274593 only. The door also uses scrapping plates #669970 and #669971.
CTX 2-Spindle Top Scrapping Plate includes hardware: 2 nuts, and bolts each. One is used on the top of 20 Spindle Door.

Pro 16 20S Plastic Extension Pressure Plate
CTX 5-Spindle Scrapping Plate includes hardware: 2 nuts, and bolts each.
10-Spindle Scrapping Plate fits all OEM Pro 16, & Pro 12 Series style JD Doors
Pro Rear Pressure Door Tension Cable Assembly
Pro Rear Pressure Door Pin Fastener Lock
Spring Lock Pin
Front 20S CTX ExtenDoor – Single Pik Pressure Plate with Welded Steel Scrapping Fins – Fits Front (9976-CP770) and Rear (7760-CP770)
Rear 20S CTX ExtenDoor – Single Pik Pressure Plate with Welded Steel Scrapping Fins – Fits Rear (9976-9996) only.

R.H. Torsion Spring for the front pressure plate
R.H. Torsion Spring for the top and bottom portions
Pro 16 Pressure Plate 20S
New Deep Style Contour Pro 16 Pressure Plate 20S
Pressure Plate Pro Series Pin
Pin Kit: Includes Spring, Snap Ring, Pin
(9900-CP770) Spring that replaces N33404
Snap Ring
Pro 16 20S Front Pressure Plate
Pro 16 20S Rear Pressure Plate
Pro 16 Angle Pressure Plate Extension Clamp

Nuts, Bolts, and Washers are Also Sold Separately

Everything in parts, down to the nuts and bolts, is sold separately as needed by the dealer or the farmer in need of repairs. These are the nuts, bolts, and washers:

Learn More

Ordering from Certi-Pik, USA

Part numbers are the most essential things to know when parts break on cotton-harvesting machines. Farmers and dealers can sometimes find the part numbers on stickers on the part, or they will be etched into the part somewhere visible. Otherwise, browsing our printed or on-line catalog can be helpful to find the part you need. Once the part number is determined, a call can be made to the customer service department to order the part, or it will be in stock if found in a dealer’s store. Make every effort to provide the correct part number as some parts look the same but are different and will not fit every model.

Made to fit John Deere 9976-CP690 PRO-16 20S Pressure Plate Assembly