JD CTX Extended Deep Dish Doors
The John Deere CTX Extended Deep Dish Doors are capable of harvesting more cotton and putting it in the basket, because of the longer and deeper picking zone, as well as the rigidity of the door. The CTX scrapping plates were designed specifically for these series of doors. These plates have the ability to push cotton a greater distance up the spindle due to the overall depth of the fins on the scrapping plates which allows for a greater amount of cotton to be captured, increasing your overall efficiency.
Ordering Extended Deep Dish Doors
Also available to customers who call in to have doors replaced on their John Deere Harvesters, various components are used with the doors including the OEM extensions: steel and plastic, clamps, pins, pin kits: which include the pin, spring and snap ring, hardware, and Certi-Pik’s CTX scrapping plates. The scrapping plates are sold with attaching hardware. To be sure you’re ordering the right parts for replacement, you should reference the part number itself to the service representative, so no errors are made, and so no valuable time is lost if the parts are ordered incorrectly which would require the correct parts to be shipped later.
When ordering the scrapping plates, there are two options that you will want to be aware of, the Top 2 Spindle CTX Scrapping Plate which is used on the top of the 20 spindle door, and the 5 Spindle CTX Scrapping Plate which has 3 used per door. Their part numbers respectively are 669970 and 669971. We also have available an all-steel door with welded in fins, which replaces the need to buy the aluminum scrapping plates. If you are concerned about the weight of your picking unit: the 20 spindle door with aluminum scrapping plates and the 20 spindle door with welded steel fins weigh approximately 38 pounds each.
Whether you are working on the front or rear of your picking unit, we have you covered. Again, when ordering any of these individual components, make sure to have either the Certi-Pik part number handy, or the OEM part number, so we can be sure of sending you exactly what you need the first time.
Machinery using the Extended Deep Dish Doors
For John Deere equipment, our CTX doors fit onto the models 9960, 9965, 9970, 9976 9986, 9996, 7760, and CP690. Non-stop harvesting is now the norm in the cotton-picking industry, the progression in technology of these machines has helped to make non-stop harvesting the standard.
The CP690 cotton picker is actually the successor to the original revolutionary non-stop harvester manufactured by John Deere, which was the 7760 model. The CP690 represents a 5% improvement in harvest speed over the 7760, and there’s also a brand-new command center which has a touchscreen display that makes operations a breeze.
You also get tremendous traction control with the new anti-slip regulation provided, and when it’s operating at peak performance, the CP690 can give you 590 hp, to make harvesting as fast and as efficient as it can be. Comparably if you’re into cotton strippers, the CS690 is capable of 530 horsepower, and it has 10% improved air system capacity compared to the cotton stripper which preceded it.
Using any of these machines will definitely make for less time in the field, and give you more time that you can focus on other issues around your operation. You will undoubtedly save money on labor and fuel, and that can improve your bottom line, so whichever of these that you choose to work with, they will definitely improve your cotton harvesting operation.
Aftermarket Extended Deep-Dish Pressure Doors For John Deere/Case IH
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: Single Pik – CTX ExtenDoor – CASE/IH- R.H. FRONT GUIDE (SOLD WITH: CTX20CL, CTX20FE & HARDWARE: 5x 01540P & 5x 10213P) REP. ALL 2000 SER. THRU 635 M.E. OEM GUIDES (USES 3x #669970 S.P.) (ILLUSTRATED)
OEM Part: 87669791
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: Single Pik – CTX ExtenDoor – CASE/IH – L.H. UNITS – 2022, 2044, 2555 (SOLD WITH: CTX20CL, CTX20FE, & HARDWARE: 5x 01540P & 5x 10213P) REPLACES OEM GUIDE #1546336C2 AND EXT. #1982710C2
OEM Part: CTX46336L
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: CASE/IH 2000 SERIES – ANGLE, EXTENSION CLAMP
OEM Part: 87689115
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: CASE/IH 2000 SERIES – EXTENSION, PLASTIC, FRONT
OEM Part: 87689109
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: CASE/IH 2000 SERIES – REMOVABLE EXTENSION, FRONT DOOR, STRONGLY RECOMMENDED – (ATTACHES WITH OEM SPRING ROD #’S 673851R3, 10322R, & 1982712C1)
OEM Part: 87689108
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: CASE/IH – BUSHING – REAR DOOR – OPTIONAL – (REPLACES: OEM 1x 86982778-SPACER & 2x 216544C1-BUSHING)
OEM Part: CTX20TB
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: Single Pik – CTX ExtenDoor – CASE/IH – R.H. REAR GUIDE (SOLD WITH: CTX20CL, CTX20RE & HARDWARE: 5x 01540P & 5x 10213P) REP. ALL 2000 SER. THRU 635 M.E. OEM GUIDES (USES 3x #69576R2 S.P.) (ILLUSTRATED)
OEM Part: 87669794
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: Single Pik – CTX ExtenDoor – CASE/IH – L.H. UNITS – 2022, 2044, 2555 (SOLD WITH: CTX20CL, CTX20RE, & HARDWARE: 5x 01540P & 5x 10213P) REPLACES OEM GUIDE #1546344C2 AND EXT. #1982711C2
OEM Part: CTX46344L
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: CASE/IH 2000 SERIES – EXTENSION, PLASTIC, REAR
OEM Part: 87689114
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: Single Pik – CTX ExtenDoor – JD – PRESSURE PLATE – FRONT & REAR – (9960-9965 IN-LINE) REPLACES OEM# AN193029 – ( THIS DOOR USES 3x #669970 SCRAPPING PLATES)
OEM Part: CTX93029
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: EXTENSION – FRONT (9935,9960-9965)
OEM Part: AN193844
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: ANGLE – EXTENSION CLAMP, FRONT & REAR (9935,9960-9965)
OEM Part: N198851
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: EXTENSION – PLASTIC, FRONT & REAR, (9935,9960-9965)
OEM Part: N196126
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: PIN KIT – INCLUDES: 1x #34274-PIN, 1x #19488P-SPRING, 1x #33504P-SNAP RING
OEM Part: 34274K
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: REINFORCEMENT – PRESSURE PLATE (9935-CP690 – IN-LINE & PRO) 2x / 18S PLATE, 3x / 20S PLATE
OEM Part: N198712
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: Single Pik – CTX ExtenDoor – JD – PRESSURE PLATE – PRO 16 20S : FRONT (9976-CP690) & REAR (7760&CP690) – REPLACES OEM #AN274593 & AN279558 – ( THIS DOOR USES 3x #669970 & 1x #669971 SCRAPPING PLATES)
OEM Part: CTX74593F
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: Single Pik – CTX ExtenDoor – JD – PRESSURE PLATE – PRO 16 20S : REAR (9976-9996) REPLACES OEM #AN274593 – (THIS DOOR USES 3x #669970 & 1x #669971 SCRAPPING PLATES)
OEM Part: CTX74593R
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: EXT. – FRONT PRESSURE PLATE, PRO-16 20S (9976-CP690)
OEM Part: AN272944
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: ANGLE – EXTENSION CLAMP, PRESSURE PLATE, PRO-16 20S (9976-CP690) (AR: 6x 01519-1″-BOLT & 6x 10215P-NUT)
OEM Part: N274102
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description:
EXTENSION – PLASTIC, PRESSURE PLATE, PRO-16 20S, FRONT & REAR – REPLACES #N274104 : (7760-CP690)
OEM Part: N274104
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: PIN KIT – INCLUDES: 1x #75113-PIN, 1x #19488P-SPRING, 1x #33504P-SNAP RING
OEM Part: 75113K
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: Single Pik – CTX ExtenDoor – JD – PRESSURE PLATE – PRO 12 18S : FRONT (9970-CP690) REPLACES OEM #AN274587 & AN279557 – (THIS DOOR USES 3x #669970 SCRAPPING PLATES)
OEM Part: CTX74587F
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: Single Pik – CTX ExtenDoor – JD – PRESSURE PLATE – PRO 12 18S : REAR (9970-CP690) REPLACES OEM #AN274587 – (THIS DOOR USES 3x #669970 SCRAPPING PLATES)
OEM Part: CTX74587R
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: EXTENSION – FRONT PRESSURE PLATE, PRO-12 18S (9970-CP690)
OEM Part: AN274542
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: ANGLE – EXTENSION CLAMP, PRESSURE PLATE, PRO-12 18S, (AR: 5x 01519-1″-BOLT & 5x 10215P-NUT) (9970-CP690)
OEM Part: N278107
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: EXTENSION – PLASTIC, PRESSURE PLATE, PRO-12 (9935-9996)- 18S (FRONT & REAR)- SUBS TO #KK10468: (7760-CP690)
OEM Part: N278108
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: CTX (5-SPINDLE) SCRAPPING PLATE – SOLD WITH ATTACHING HARDWARE- 2 BOLTS, & NUTS, NOT USED W/ REAR CASE
OEM Part: 669970
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: TOP (2-SPINDLE) CTX SCRAPPING PLATE – SOLD WITH ATTACHING HARDWARE – 2 BOLTS, & NUTS, (1 ON TOP OF 20 SPIN. DOOR)
OEM Part: 669971
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: SCRAPPING PLATE- LARGE CASE/IH OEM STYLE – SOLD WITH ATTACHING HARDWARE- 2 BOLTS, & NUTS (FITS ONLY REAR CASE CTX DOOR AND OEM DOOR EXTENSIONS)
OEM Part: 669576R2
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: Single Pik – CTX ExtenDoor – JD – PRESSURE PLATE – WELDED STEEL SCRAPPING FINS – PRO 16 20S : FRONT (9976-CP690) & REAR (7760&CP690) – REPLACES OEM #AN274593 & AN279558
OEM Part: CTX79558FIN
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: Single Pik – CTX ExtenDoor – JD – PRESSURE PLATE – WELDED STEEL SCRAPPING FINS – PRO 16 20S : REAR (9976-9996) REPLACES OEM #AN274593
OEM Part: CTX79558FINR
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: BOLT – M10 X 30 ROUND HEAD – SQR NECK
OEM Part: 03M7192
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: WASHER – .410 X 1.5 X .120″
OEM Part: 24H1730
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: NUT – M10 – SERR HEX FLANGE
OEM Part: E63526
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: BOLT – 5/16 X 1″ CARRIAGE
OEM Part: 03H1709
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Description: NUT – 5/16 – SERR HEX FLANGE
OEM Part: 10213P
Section: Picking Unit Cabinet
Certi-Pik, Usa Single Pik- Extended Deep-Dish Pressure Doors
Why Choose Certi-Pik, USA?
At Certi-Pik USA, quality and customer convenience are our priorities:
- Easy ordering: To make ordering simple for you, you can get in touch with our team and send your order via email or fax. Feel free to place your CIH parts order at any time, around the clock, using our convenient and secure process. If you need guidance or have parts questions, call us for answers and we can also take your order on the call if you like.
- Quality guarantee: We stand behind our products with a 90-day warranty against defects in manufacturing or materials. If on an extremely rare occasion you have a need to return a component, we inspect it and ship your replacement components free of charge, same day if humanly possible.
- Fast shipment: When you order before noon, we ship products the same day if possible, and afternoon orders are shipped the next business day. We use UPS, choosing the service level needed to get the components to you on time (Ground, Next Day Air, 2nd Day Air, etc.)
- Pay any way: Our flexible payment options help you manage your company budget with ease. Choose from bank wire transfer, Visa, MasterCard, Discover, American Express or COD (cash on delivery). Money orders are fine, too.
Get the CIH Water System Parts You Need! Our Experts Are Ready to Help
In order to provide convenient, one-stop ordering for all your cotton harvesting and aftermarket CIH water system needs, Certi-Pik, USA also sells a wide variety of specialized accessories and sheet metal parts for cotton-harvesting equipment rebuilds.
Let the market leader in cotton harvester components provide every OEM-quality aftermarket component you need for your Case IH harvester. Contact Certi-Pik, USA online, or call (712) 752-8460 today.
