Made to fit John Deere 9935, 9970-CP690 PRO-12 18S Pressure Plate Assembly

Made to fit John Deere 9935, 9970-CP690 PRO-12 18S Pressure Plate Assembly

Cotton-picking machines are complex and have many large and small parts that require replacement from time to time. The Pro 12 18S pressure plate assembly is one part, in particular, that may fail. The listed diagram linked here shows several components that make up this assembly. We have these aftermarket John Deere parts on hand to help with repairs as needed.

Our aftermarket parts fit perfectly when compared to the OEM style. Dealers love to sell aftermarket parts because they are more affordable, and the farmers are less stressed during harvest season, knowing the parts are available when needed so they are able to harvest the crops at the right time without delay.

Maintenance is the most important thing to keep up with to keep everything operating correctly. Machine parts need repair and replacement eventually. The pressure plates are one of the many parts that need maintenance and stand a chance of failing one day. When the farmer knows there will be hardly any delays due to a lack of parts or having to wait for them to come in, it leaves them feeling confident in completing the harvest.

Learn More

The Parts of the Pro 12 18S Pressure Plate Assembly

When breakdowns are a factor, Certi-Pik, USA keeps everything on the shelves, so focusing on the individual component you need is the priority instead of purchasing the whole assembly. Once the order for the piece is placed, the wait time is short.

Certi-Pik, USA is respected and widely used by dealers too. If the farmer chooses to go to the nearest dealer to purchase the part, they know the dealer will mark up the cost. The trip and purchase are worth it when they get the Pro parts in their possession to get their machinery up and running again. When issues are present in breakdowns, the farmer knows these parts of the Pro 12 18S pressure plate assembly will be made available within little to no time.

In-Line and Pro Pressure Plate Reinforcement
Pro 12 18S CTX ExtenDoor Single Pik Front Pressure Plate. Replaces the OEM #AN274587 and AN279557. Note: This door uses 3x #669970 Scrapping Plates.
Pro 12 18S CTX ExtenDoor Single Pik Rear Pressure Plate. Replaces the OEM #AN274587 and AN279557. Note: This door uses 3x #669970 Scrapping Plates.
CTX 5-Spindle Scrapping Plate comes with Attaching Hardware which entails 2 nuts and bolts.

Pro 12 18S Rear Pressure Plate Extension
Pro 12 18S Front and Rear Plastic Pressure Plate Extension
Pro Series 10 Spindle Scrapping Plate Fitting OEM Style JD Doors. Uses 1 / Pro 12 Door
Pro Series 4 Spindle Scrapping Plate Fitting OEM Style JD Doors. Uses 2 / Pro 12 Door
Pro Rear Pressure Door Tension Cable Assembly
Pro Rear Pressure Door Pin Fastener Lock
Spring Lock Pin

Snap Ring
Spring
Pressure Plate Pro Series Pin
The Pin Kit has a Pin, Spring, and Snap Ring.
R.H. Torsion Pro Pressure Plate Spring Top and bottom positions
R.H. Torsion Front Pressure Plate Spring
Pro 12 Pressure Plate
Pro 12 Pressure Plate 18S New Deep Style Contour
Pro 12 18S Front Pressure Plate Extension

Nuts, Bolts, and Washers

The nuts, bolts, and washers are sold separately when the farmers or dealers need them. Here are the nuts, bolts, and washers:

Learn More

Ordering from Certi-Pik, USA

Part numbers are essential when it comes to ordering parts. Without the part number, there is a chance of delivering the wrong part because some look the same but are made for different locations. All it takes is to contact customer service with the part number, and they can locate the part quickly and have it shipped the same day. In many cases, they can have it delivered the next day at the customer’s request.

Made to fit John Deere 9935, 9970-CP690 PRO-12 18S Pressure Plate Assembly