John Deere Spindle Drive Shaft Parts

John Deere Spindle Drive Shaft

If you’re looking for John Deere Spindle Drive Shafts, then read on see what we have available for you.
No matter whether you’re a John Deere dealer or farmer, we can supply you with original replacement parts for your cotton harvesting equipment

Maintenance and Cleaning

One of the most hardworking parts of your cotton harvester is the picking unit, including the spindle drive shaft and its bearings.

Proper setup and inspection ensure that you will get the longest life from additional components such as spindles and doffers.

Your cotton picker must be cleaned and maintained according to the operator’s manual. This will ensure that you enjoy reduced downtime, improved productivity, and reduced risk of fire.

Due to the constant contact with fibrous plant material, dirt, and other debris, broken, missing, or worn parts are generally discovered during your regular inspections which help to avoid downtime when you need your equipment operating at full capacity. Our top Drive Gears are machined, closely sized, and heat treated using high quality solid steel that will outperform powdered metal gears, and give you the correct back lash and durability you need.

The spindle drive shaft undergoes its fair share of abuse during harvesting and the operator’s manual covers the regular maintenance items such as daily cleaning and inspection when in harvest configuration, which will potentially save you a lot of money. Our Drive shafts are manufactured from top quality to-size precision ground material that will provide a press fit for our top gears and correct clearances for the spindle drive gears. This sizing will eliminate the problems of roll pins prematurely shearing off causing unnecessary downtime, machine failure, and loss of revenue.

Correct daily adequate greasing as well as checking the clearances will help you maintain smooth operation of the needle bearings, and identify a problem before it can potentially cause a costly failure or in the case of seized bearings or broken roll pins, further damage inside the machinery.

Should you require assistance, we are just a phone call away.

john deere tractor

Contact Us Now

If you have the time, browse the links to our very extensive list of parts that appear at the bottom of this page. Alternatively, you’re welcome to give us a call at Certi-Pick USA on our toll-free number, 1-888-CERTIPIK (237-8474), and one of our staff will help you find what you need, right away.
If you need to find a specific part and know exactly what you need right now, then click the links in the table below for detailed assembly drawings.
Each part is labeled, making the selection of the items you need for rebuilding your picking unit cabinets or to replace any worn-out items, quick and easy.

Picker Bar and Spindle Assembly – 9900-9920, 9940 Picker Bar and Spindle Assembly – 9930-9935, 9950-CP690 Spindle Drive Shaft Assembly
Cam Tracks and Drum Head Upper Doffer Adjustment Housing and Sprocket Assembly Doffer and Lower Housing Assembly
Idler Gear Assembly Upper Drum Drive Assembly

You can contact us using the following additional options:
Email: [email protected]
Fax: 1-712-752-8472
Shopping Cart: You can place your order through the links on our website and we will confirm your order via email or get in contact with you to discuss any details that may be unclear. For your convenience, you can order your parts any time of the day or night.

For your convenience, you can order your parts any time of the day or night.

Comprehensive Inventory in Stock

We carry a comprehensive inventory to ensure that we can supply what you need in the shortest possible time. Our system to ensure that we don’t run out of those important spares and components that you’re going to need has been developed over many years in business. We can ship any components from our warehouse that you may require, at a moment’s notice.

Comprehensive Spindle Drive Shaft Parts Available

We stock a full range of specialty items and sheet metal components for use in rebuilding cotton-harvesting equipment. As we fabricate replacement components for the top pickers in the industry, you have access to everything that you could possibly need to get your machines back in the field.
We supply the drive shafts, thrust washer, retaining ring, top gears, needle bearings, spindle gears, shims, roll pins, bearing sleeve, etc.

Ordering the Right Parts is Quick and Easy

It can be incredibly frustrating when opening a parts package, to find that you’ve been sent the incorrect part. Our job is to make it as easy as possible for you to order and receive the exact part or assembly you need to get your machinery fixed or serviced and back out where it belongs, making you money.

Please provide us with the following information when placing your order:

  • Certi-Pik part number or OEM part number
  • A description of the item
  • The model number of the machinery you’re fixing

Contact us today for your John Deere Spindle Drive Shaft parts.

Cp690 Cotton Modules

John Deere Spindle Drive Shaft Assembly

Picking Unit System: John Deere Spindle Drive Shaft Assembly N118289 (18289) for Sale

1 – #18289

Description: DRIVE GEAR (9900-CP770)
OEM Part: N118289
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly T23694 (23694P) for Sale

2 – #23694P

Description: SNAP RING (9900-CP770)
OEM Part: T23694
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly N190988 (90988P) for Sale

3.1 – #90988P

Description: THRUST WASHER (ILL.)
OEM Part: N190988
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly N278781 (78781) for Sale

3.2 – #78781

Description: PRO THRUST WASHER – WILL FIT ALL MODELS USING #78782 SLEEVE
OEM Part: N278781
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly JD8804 (08804P) for Sale

4.1 – #08804P

Description: BEARING – 23 NEEDLES
OEM Part: JD8804
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly JD8804B (08804PFC) for Sale

4.2 – #08804PFC

Description: NEEDLE BEARING – FULL COMPLIMENT, USED ON BEARING SLEEVE #78782
OEM Part: JD8804B
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly 34H266 (00266P) for Sale

5 – #00266P

Description: SPRING PIN – 5/32 X 1″ – YELLOW FINISH – USED ON TOP OF SPINDLE DRIVE SHAFT ONLY. IN HOLES IN TOP GEAR AND BEARING SLEEVE.
OEM Part: 34H266
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly 34H235 (00235P) for Sale

6 – #00235P

Description: SPRING PIN – 3/32 X 1″
OEM Part: 34H235
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly N278782 (78782) for Sale

7 – #78782

Description: BEARING SLEEVE – WILL FIT ALL MODELS USING #78781 THRUST-WASHER
OEM Part: N278782
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly L2456N (02456P) for Sale

8.1 – #02456P

Description: SPINDLE GEAR – 1/8″ PIN HOLE
OEM Part: L2456N
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly N371626 (71626P) for Sale

8.2 – #71626P

Description: SPINDLE GEAR – 5/32″ PIN HOLE
OEM Part: N371626
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly 34H45 (00045P) for Sale

9.1 – #00045P

Description: SPRING PIN – 1/8 X 1″
OEM Part: 34H45
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly 34H60 (00060P) for Sale

9.2 – #00060P

Description: SPRING PIN – 5/32 X 1″ – BLACK FINISH – USED ON SPINDLE DRIVE SHAFT.
OEM Part: 34H60
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly N114199 (14199) for Sale

10.1 – #14199

Description: DRIVE SHAFT – 14 SPINDLE – 1/8″ PIN HOLES IN GEARS
OEM Part: N114199
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly N278037 (78037) for Sale

10.2 – #78037

Description: DRIVE SHAFT – 18 SPINDLE – 1/8″ PIN HOLES IN GEARS (9900-9976)
OEM Part: N278037
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly N275212 (75212) for Sale

10.3 – #75212

Description: DRIVE SHAFT – 20 SPINDLE – 1/8″ PIN HOLES IN GEARS (9900-9976)
OEM Part: N275212
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly N371720 (71720) for Sale

10.4 – #71720

Description: DRIVE SHAFT – PRO 12 – 18 SPINDLE – 5/32″ PIN HOLES IN GEAR (9970-CP690)
OEM Part: N371720
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly N371572 (71572) for Sale

10.5 – #71572

Description: DRIVE SHAFT – PRO 16 – 20 SPINDLE – 5/32″ PIN HOLES IN GEAR (9976-CP770)
OEM Part: N371572
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly AN276737 (76737-K) for Sale

11.1 – #76737-K

Description: ** KIT ** 20 SPINDLE (PRO) DRIVE SHAFT ( NOT ASSEMBLED ) – 5/32 GEAR & SHAFT HOLES
OEM Part: AN276737
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly
Picking Unit System: John Deere Spindle Drive Shaft Assembly AN276743 (76743-K) for Sale

11.2 – #76743-K

Description: ** KIT ** 18 SPINDLE (PRO) DRIVE SHAFT ( NOT ASSEMBLED ) – 5/32 GEAR & SHAFT HOLES
OEM Part: AN276743
Section: Picking Unit System
John Deere Spindle Drive Shaft Assembly