John Deere 2-Row Fan Assembly
John Deere 2-Row Fan Assembly
Everything must work properly when it is harvesting time in the cotton industry. One of the prominent parts of the cotton picking machine is the 2-row fan assembly. The fans operate by creating a venturi in the cotton picker’s duct work which sucks the cotton from the picking unit and blows it into the picker’s collection basket. Sometimes an individual component fails, and a part of the assembly is all that is required.
John Deere and IH Case have used the same theory over the years but deviated in design. The diagram shown here is listed with 68 pieces and six kits that make up the two styles of John Deere 2 Row Fan Assemblies. The main difference between the two centers around the newer style incorporating a heavier-built fan shaft. The parts and kits below make up the assemblies.
The Parts of the John Deere 2-Row Fan Assembly
- Front Bearing Side Support
- Rear Bearing Side Support
- Side Panel
- Plastic Baffle / Orifice
- Wrap Around Cover with Service Hole
- Angle for Shim
- Outlet Support Channel
- Shim for Fan Outlet
- Under Shroud Bottom Housing Cutoff with Foam
- Tension Bracket
- Water Pulley Sheave
- Water Pulley Bushing
- 1-3/8 Bearing Assembly with Lock and Housing Collar
- 1-1/8 Bearing Assembly with Lock and Housing Collar
- 1-3/8 X 17.875 Blower Shaft
- Snap Ring
- Stop Collar
- Fan Blade
- 1.4 X 1.875 X 4.575 Shaft Spacer
- 1/4 X 2-1/8 Woodruff Key
- Cotter Pin
- Fan Wrap Inspection Cover
- Fan Wrap Inspection Clip
- Fan Drive JD Belt
- Front 1.5″ Shaft Frame Support
- Rear 1.5″ Shaft Frame Support
- Baffle with Metric Holes
- 1.5″ Shaft Pillow Block Bearing Assembly
- 1.5″ Shaft Short Sleeve
- Tone Wheel
- 1.5″ Diameter Fan Shaft
- 1.50″ Bore Fan Blade
- 1.5 Shaft Long Spacer
- Belt Guard Angle
- 1-1/2 Bearing Assembly with Housing and Locking Collar
- (2 Band) Fan Drive Belt for Fan Rotor
Nuts, Bolts, and Washers for John Deere 2-Row Fan Assembly
- M8 X 25 Round Head Short Square Neck Bolt
- M8 Wing Nut for the 2R Fan Wrap Inspection
- M10 Serr Hex Flange Nut
- M10-1.5 Nylon Lock Nut
- M10 X 60 Hex Head Bolt
- M8 Serr Hex Flange Nut
- 406 X 1.25 X .104 Reinforcement Washer
- M8 X 20 Round Head Square Neck Bolt
- M8 X 20 Round Head Short Square Neck Bolt
- M10 X 80 Round Head Short Square Neck Bolt
- M30 Pro Doffer Nylon Lock Nut
- M12 Serr Hex Flange Nut
- M12 X 45 Smooth Hex Flange Bolt
- M12 X 50 Smooth Hex Flange Bolt
- 1.75 X .937 X .13 HDN Washer
- M24 Hex Stover Lock Nut
- 3/8 Nylon Lock Nut
- .406 X .810 X .060″ Washer
- .406 X .718 X .120″ Washer
- 3/8 X 2-1/4″ Hex Head Bolt
- 5/16 X 3/4″ Carriage Bolt
- 5/16 Serr Hex Flange Nut
- 3/8 X 3″ Carriage Bolt
- 1/2 X 2″ Hex Head Bolt
- 1/2″ Lock Washer
- 17/32 X 1-1/8 X .105″ Washer
- 3/8 X 1-1/2″ Carriage Bolt
- 1.390 X 2.125 X .135″ Washer
- 1-13/32 X 1-3/4 X .060″ Washer
- 3/8 X 1-3/4″ Carriage Bolt
- 1-1/16 X 2 X .134″ Washer
- 1-14 Castle Nut
Six Kits Available
- Kit #1: #15233 – 2-Row Fan Kit – 1-3/8″ Shaft – All Parts Are Unassembled w/ #07200 Bolt Kit w/o #90049P Sheave
- Kit #2: #15233A – 2-Row Fan Kit – 1-3/8″ Shaft – All Parts Are Assembled w/o #90049P Sheave
- Kit #3: # 07200 – Bolt Kit Complete For Fan Assembly #15233 Does Not Include Hardware For Cover #20401
- Kit #4: #74106 – 2-Row Fan Kit – All Parts Are Unassembled w/ #74106BK Bolt Kit – Does Not Include Belt Guard (May Use Bushing and Water Pulley on Models 9900-30CP & 7440CS)
- Kit #5: #74106A – 2-Row Fan Kit – All Parts Assembled (May Use Bushing and Water Pulley on Models 9900-30CP & 7440CS) Belt Guard Not Included
- Kit #6: #74106BK – Bolt Kit – Does Not Include Hardware For Cover #20401
Ordering from Certi-Pik USA
John Deere and Case IH parts are sometimes needed at a moment’s notice. The information on all the pieces that make up the 2 row fan assembly is listed on the webpage and leaves the farmers with the good news that they do not have to purchase the entire assembly. Certi-Pik USA’s customer service will help farmers and dealers get the parts needed to get your cotton picker up and running. Contact Certi-Pik USA to order with the part number and all the personal information needed for shipping.
Contact Us