Case IH Fan Parts
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
Case / IH Front Fan Assembly, 2555 (S.N.500) – 635
Case / IH Rear Fan Assembly, 2555 (S.N.500) – 635
Case IH Fan Parts
As a major supplier of Case IH fans, components, and spares, we carry new aftermarket air system parts as well as other aftermarket cotton picker parts and accessories.
Our high-quality, cutting-edge components include front and rear fan assemblies, housing components, inner blade, and shaft parts, pulleys, and bolt kits together with other miscellaneous components.
We are committed to working hard to guarantee that whether you’re a dealer in Case/IH Cotton Picking Machinery or one of our farming customers, you receive the best new aftermarket replacement parts for your harvesting equipment.
Downtime Costs Money
If one of your Miscellaneous Parts needs to be We know as well as you that cotton pickers are temperamental beasts. Any time you combine a vehicle with ultra-fine tolerances with the harsh reality of farming, you’re headed for possible trouble.
Unless you take the time to perform proper maintenance and daily inspections, you’ll end up with a very expensive piece of machinery either under-performing or stranded during a critical period during the harvest.
We recommend the following:
Regular Case IH Air System Inspection
It is essential that your air system operates optimally as it will prevent choke problems within your harvester.
By inspecting your fans and air system regularly and replacing worn components timeously, you’ll save time and money.
Lint build-up on the fan blade and elsewhere causes balance problems as well as a multitude of other problems and needs to be cleaned immediately before it causes serious system failure.
Avoiding Catastrophic Failures
Catastrophic fan assembly failure along with cracking, vibration, and lowered airflow can all be avoided by adhering to proper maintenance procedures.
As the cotton harvester relies on the fan to push the cotton into the containment area from the picking unit, any damage or wear in the fan and air system has a knock-on effect which results in clogging in the ducting and even the picking unit itself.
Replacement of worn or damaged air system components or fan assemblies can potentially save you a lot of time and money during optimal harvest times.
Each wasted minute costs you money. And that is where we aim to help you.
Whether you require regular maintenance, fixing a broken part, or urgently requiring the replacement of a worn-out component, there’s no time to waste.
We are ideally placed to provide you with whatever parts or assemblies you urgently require.
Contact Us Now
For urgent orders, rather than searching through our very extensive list of parts, give us a call at Certi-Pik USA on our toll-free number, 1-888-CERTIPIK (237-8474), and one of our staff will help you out right away.
In any case, to reduce possible confusion, it helps to take a few moments and provide us with the correct part number you are looking for.
On the other hand, if you’d like to browse to find exactly what you’re looking for, then click the links below to access detailed assembly drawings that will show you exactly what you may need.
Selecting the right Case IH Fan assembly to rebuild your cotton picker or to replace any worn-out items will be quick and easy. All purchases are covered by our 90-day warranty.
We offer fast shipment so that you get your order ASAP. We accept several credit cards, or cash on delivery, so there’s no need to worry about payment slowing things down.
You can contact us using the following additional options:
Email: [email protected]
Fax: 1-712-752-8472
Shopping Cart: You can place your order through the links on our website and we will confirm your order via email or get in contact with you to discuss any details that may be unclear.
For your convenience, you can order your parts any time of the day or night.
Case IH Cotton Picker Air System Parts
We stock a wide variety of the critical spare parts you need, ranging from side panels, keys, pulleys, baffles, baffle belts, and many other parts.
You can check out our catalog of parts below that includes all the air system parts that we have available to ship to you when you order.
We have the following Case IH Fan Assemblies and parts available below:
- Case/IH Front Fan Assembly, 1822-2555 (S.N.499)
If you are looking for a Case IH Front fan Assembly, we offer two options. Kit 1 is a complete front fan kit unassembled, and Kit 2 is a fully assembled front fan kit. Optionally if you are looking for the hardware components: Kit 3 is a Bolt kit. - Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
If the rear fan assembly is not working, you need to replace it. You can replace the full assembly or individual parts for the rear fan assembly detailed below. - Case / IH Front or Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
There are three Kits available if you are looking for the front or rear fan assembly for the newer models also. You can choose to buy them assembled or unassembled. Individual components are available, including parts for the housing assembly, inner blade, and shaft assembly, pulleys, and bolt kits.
Contact Certi-Pik today!
Certi-Pik, USA also offers a range of specialized accessories and sheet metal components for cotton-harvesting equipment rebuilds in order to give easy, one-stop ordering for all your cotton harvester’s aftermarket parts.
Allow the industry leader in cotton harvester components to provide every OEM-quality aftermarket component your Case IH harvester requires.
For more information about our case IH aftermarket parts, call us at (712) 752-8460 or contact us online today.
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
1 – #60120C3
Description: SIDE SUPPORT – BEARING ( 1/FRONT FAN, 2/REAR FAN )
OEM Part: 1260120C3
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
2 – #60067C2
Description: FAN SIDE PANEL – NEW STYLE – LARGER TRANSITION NOTCH
OEM Part: 1260067C2
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
3 – #07515C1
Description: BAFFLE – PLASTIC BAFFLE OR ORIFICE
OEM Part: 207515C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
4 – #21533C1
Description: WRAP AROUND – HOUSING COVER
OEM Part: 221533C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
5 – #04414C1
Description: BRACKET – HOUSING COVER TENSION BRACKET
OEM Part: 204414C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
6 – #38329C1
Description: SIDE SUPPORT – IH FRONT FAN – DRIVE SIDE ( 1/FRONT FAN )
OEM Part: 1338329C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
7 – #04415C1
Description: BRACKET – UNDER SHROUD TENSION BRACKET
OEM Part: 204415C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
8 – #04416C1
Description: UNDER SHROUD – HOUSING COVER
OEM Part: 204416C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
9 – #10217P
Description: NUT – 1/4 – SERR HEX FLANGE
OEM Part: N10217
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
10 – #62120R1P
Description: CLASP – CABLE CLIP
OEM Part: 362120R1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
11 – #0043448P
Description: BOLT – 1/4 X 1/2″ CARRIAGE
OEM Part: 434-48
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
12 – #0434412P
Description: BOLT – 1/4 X 3/4″ CARRIAGE
OEM Part: 434-412
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
13 – #15020C1
Description: PIPE – HOUSING SPACER
OEM Part: 215020C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
14 – #15709C1
Description: STUD
OEM Part: 215709C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
15 – #2601346P
Description: SCREW – 8-18 X 3/8″ SELF-TAP
OEM Part: 260-1346
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
16 – #01540P
Description: BOLT – 5/16 X 3/4″ CARRIAGE
OEM Part: 434-512
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
17 – #01565P
Description: BOLT – 3/8 X 3″ CARRIAGE
OEM Part: 433-648
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
18 – #10213P
Description: NUT – 5/16 – SERR HEX FLANGE
OEM Part: 425-105
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
19 – #11234P
Description: NUT – 3/8 – NYLON LOCK
OEM Part: 425-106
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
20 – #0413528P
Description: BOLT – 5/16 X 1-3/4″ HEX HEAD
OEM Part: 413-528
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
21 – #1311215P
Description: NUT – 5/16 – CENTER LOCK
OEM Part: 131-1215
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
22 – #60257C1P
Description: FRONT BEARING – INCLUDES HOUSING AND LOCKING COLLAR ( 2/FRONT FAN, 1/ REAR FAN )
OEM Part: 1260257C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
23 – #60070C3
Description: SHAFT – FRONT FAN
OEM Part: 1260070C3
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
24 – #60010C1
Description: FAN BLADE
OEM Part: 1260010C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
25 – #60073C1
Description: SHAFT SPACER
OEM Part: 1260073C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
26 – #01480P
Description: BOLT – 3/8 X 1-1/2″ CARRIAGE
OEM Part: 434-624
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
27 – #0118001P
Description: KEY – 5/16 X 2-1/8WOODRUFF
OEM Part: 118001
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
28 – #9581214P
Description: WASHER – 1-13/32 X 2-1/4 X 1/16
OEM Part: 495-81214
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
29 – #9611094P
Description: WASHER – 1.75 X .937 X .13 HDN
OEM Part: 496-11094
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
30 – #43386R1P
Description: NUT – 7/8 – NYLON LOCK
OEM Part: 543386R1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
31 – #38322C1
Description: PULLEY – FAN (1844-635)
OEM Part: 1338322C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
32.1 – #B60258C2
Description: BELT – FAN ROTOR, MIDDLE – 1822, 1844, 2022, 2044 – (2 Band) Length 46-13/16
OEM Part: 1260258C2
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
32.2 – #B38328C1
Description: BELT – FAN ROTOR, FRONT – 1844 (S/N JJC002462 & above), 2044, 2055, 2155, 2555, CPX420, CPX420 Tier III, CPX610, CPX620, 625, 635-REAR – (3 Band)
OEM Part: 1338328C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
KIT.1 – #45030C1
Description: FRONT FAN KIT – ALL PARTS UNASSEMBLED, INCLUDES # 08200 BOLT KIT, INCLUDES ITEMS #1-#31)
OEM Part: 1345030C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
KIT.2 – #45030C1A
Description: FRONT FAN KIT – ALL PARTS ASSEMBLED
OEM Part: 1345030C1
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
KIT.3 – #08200
Description: BOLT KIT – COMPLETE FOR FRONT CASE/IH FAN KIT, 1822-2555
OEM Part: 8200
Section: Air System
Case /IH Front Fan Assembly, 1822-2555 (S.N.499)
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
1 – #60120C3
Description: SIDE SUPPORT – BEARING ( 1/FRONT FAN, 2/REAR FAN )
OEM Part: 1260120C3
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
2 – #60066C2
Description: FAN 45DEGREE SIDE PANEL – NEW STYLE – LARGER TRANSITION NOTCH
OEM Part: 1260066C2
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
3 – #07515C1
Description: BAFFLE – PLASTIC BAFFLE OR ORIFICE
OEM Part: 207515C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
4 – #21533C1
Description: WRAP AROUND – HOUSING COVER
OEM Part: 221533C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
5 – #04414C1
Description: BRACKET – HOUSING COVER TENSION BRACKET
OEM Part: 204414C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
6 – #04415C1
Description: BRACKET – UNDER SHROUD TENSION BRACKET
OEM Part: 204415C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
7 – #04416C1
Description: UNDER SHROUD – HOUSING COVER
OEM Part: 204416C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
8 – #10217P
Description: NUT – 1/4 – SERR HEX FLANGE
OEM Part: 10217P
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
9 – #62120R1P
Description: CLASP – CABLE CLIP
OEM Part: 362120R1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
10 – #0043448P
Description: BOLT – 1/4 X 1/2″ CARRIAGE
OEM Part: 434-48
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
11 – #0434412P
Description: BOLT – 1/4 X 3/4″ CARRIAGE
OEM Part: 434-412
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
12 – #15020C1
Description: PIPE – HOUSING SPACER
OEM Part: 215020C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
13 – #15709C1
Description: STUD
OEM Part: 215709C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
14 – #2601346P
Description: SCREW – 8-18 X 3/8″ SELF-TAP
OEM Part: 260-1346
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
15 – #01540P
Description: BOLT – 5/16 X 3/4″ CARRIAGE
OEM Part: 434-512
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
16 – #01565P
Description: BOLT – 3/8 X 3″ CARRIAGE
OEM Part: 433-648
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
17 – #10213P
Description: NUT – 5/16 – SERR HEX FLANGE
OEM Part: 425-105
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
18 – #11234P
Description: NUT – 3/8 – NYLON LOCK
OEM Part: 425-106
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
19 – #0413528P
Description: BOLT – 5/16 X 1-3/4″ HEX HEAD
OEM Part: 413-528
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
20 – #1311215P
Description: NUT – 5/16 – CENTER LOCK
OEM Part: 131-1215
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
21 – #3058C91P
Description: REAR BEARING, INCLUDES HOUSING AND LOCKING COLLAR
OEM Part: 1263058C91
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
22 – #60072C3
Description: SHAFT – REAR FAN
OEM Part: 1260072C3
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
23 – #60010C1
Description: FAN BLADE
OEM Part: 1260010C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
24 – #60073C1
Description: SHAFT SPACER
OEM Part: 1260073C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
25 – #60257C1P
Description: FRONT BEARING – INCLUDES HOUSING AND LOCKING COLLAR ( 2/FRONT FAN, 1/ REAR FAN )
OEM Part: 1260257C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
26 – #43386R1P
Description: NUT – 7/8 – NYLON LOCK
OEM Part: 543386R1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
27 – #0118001P
Description: KEY – 5/16 X 2-1/8WOODRUFF
OEM Part: 118001
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
28 – #9581214P
Description: WASHER – 1-13/32 X 2-1/4 X 1/16
OEM Part: 495-81214
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
29 – #01480P
Description: BOLT – 3/8 X 1-1/2″ CARRIAGE
OEM Part: 434-624
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
30 – #11234P
Description: NUT – 3/8 – NYLON LOCK
OEM Part: 21622R1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
31 – #00530P
Description: WASHER – 1.390 X 2.125 X .135″
OEM Part: 96-11144
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
32 – #9611094P
Description: WASHER – 1.75 X .937 X .13 HDN
OEM Part: 496-11094
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
33 – #38322C1
Description: PULLEY – FAN (1844-635)
OEM Part: 1338322C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
34.1 – #B88899C5
Description: BELT – FAN ROTOR – 1822, 1844, 2022, 2044 – (2 Band) Length 73-55/64
OEM Part: 1288899C5
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
34.2 – #B46117C1
Description: BELT – FAN ROTOR – 2055, 2155 – (2 Band) – 63.8″
OEM Part: 1546117C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
34.3 – #B46117C2
Description: BELT – FAN ROTOR – (3 Band) – 76.5″ (2055, 2155, 2555, CPX420, CPX420 Tier III, CPX610, CPX620) (Prior to S/N Y6T011701)
OEM Part: 1546117C2
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
KIT.1 – #45031C1
Description: REAR FAN KIT – ALL PARTS UNASSEMBLED, INCLUDES # 08400 BOLT KIT, INCLUDES ITEMS #1-#33)
OEM Part: 1345031C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
KIT.2 – #45031C1A
Description: REAR FAN KIT – ALL PARTS ASSEMBLED
OEM Part: 1345031C1
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
KIT.3 – #08400
Description: BOLT KIT – COMPLETE FOR REAR CASE/IH FAN KIT, 1822-2555
OEM Part: 8400
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
Case / IH Front Fan Assembly, 2555 (S.N.500) – 635
1 – #43038A2
Description: SIDE SUPPORT 4-BOLT REAR – 1.75 DIA SHAFT – 1 ON FRONT FAN – 2 ON REAR FAN
OEM Part: 243038A2
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
2 – #60067C2
Description: FAN SIDE PANEL – NEW STYLE – LARGER TRANSITION NOTCH
OEM Part: 1260067C2
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
3 – #07515C1
Description: BAFFLE – PLASTIC BAFFLE OR ORIFICE
OEM Part: 207515C1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
4 – #21533C1
Description: WRAP AROUND – HOUSING COVER
OEM Part: 221533C1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
5 – #04414C1
Description: BRACKET – HOUSING COVER TENSION BRACKET
OEM Part: 204414C1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
6 – #04415C1
Description: BRACKET – UNDER SHROUD TENSION BRACKET
OEM Part: 204415C1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
7 – #04416C1
Description: UNDER SHROUD – HOUSING COVER
OEM Part: 204416C1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
8 – #7403361
Description: CNH SIDE SUPPORT 4-BOLT FRONT – 1.75 DIA SHAFT – 1 ON FRONT FAN – NOT ON REAR FAN
OEM Part: 87403361
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
9 – #10217P
Description: NUT – 1/4 – SERR HEX FLANGE
OEM Part: N10217
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
10 – #0434412P
Description: BOLT – 1/4 X 3/4″ CARRIAGE
OEM Part: 434-412
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
11 – #0043448P
Description: BOLT – 1/4 X 1/2″ CARRIAGE
OEM Part: 434-48
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
12 – #1311215P
Description: NUT – 5/16 – CENTER LOCK
OEM Part: 131-1215
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
13 – #0413528P
Description: BOLT – 5/16 X 1-3/4″ HEX HEAD
OEM Part: 413-528
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
14 – #11234P
Description: NUT – 3/8 – NYLON LOCK
OEM Part: 425-106
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
15 – #01540P
Description: BOLT – 5/16 X 3/4″ CARRIAGE
OEM Part: 434-512
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
16 – #10213P
Description: NUT – 5/16 – SERR HEX FLANGE
OEM Part: 425-105
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
17 – #01565P
Description: BOLT – 3/8 X 3″ CARRIAGE
OEM Part: 433-648
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
18 – #15020C1
Description: PIPE – HOUSING SPACER
OEM Part: 215020C1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
19 – #15709C1
Description: STUD
OEM Part: 215709C1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
20 – #62120R1P
Description: CLASP – CABLE CLIP
OEM Part: 362120R1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
21 – #2601346P
Description: SCREW – 8-18 X 3/8″ SELF-TAP
OEM Part: 260-1346
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
22 – #0433832P
Description: BOLT – 1/2-13 X 1-3/4″ CARRIAGE
OEM Part: 433-832
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
23 – #42834A2
Description: 1-3/4″ BEARING ASSEMBLY
OEM Part: 242834A2
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
24 – #62934P
Description: NUT – 1/2 – SERR HEX FLANGE
OEM Part: E62934
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
25 – #57206R1P
Description: 3/8 SQUARE KEY – 2-3/8 ” LONG
OEM Part: 657206R1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
26 – #0118001P
Description: KEY – 5/16 X 2-1/8WOODRUFF
OEM Part: 126-147
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
27 – #49301A2
Description: FRONT FAN SHAFT – CNH 1.75″ DIA
OEM Part: 449301A2
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
28 – #43041A1
Description: FAN BLADE – 1.75″ ID – NEW STYLE
OEM Part: 243041A1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
29 – #9581092P
Description: WASHER – 2.50 X 1.78 X .06
OEM Part: 495-81092
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
30 – #43037A1
Description: SPACER – 1.75 ID CNH FAN SHAFT
OEM Part: 243037A1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
31 – #49746A1
Description: SPACER – .38 THICK, 1.75 FAN SHAFT
OEM Part: 449746A1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
32 – #9611094P
Description: WASHER – 1.75 X .937 X .13 HDN
OEM Part: 496-11094
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
33.1 – #0281010P
Description: 7/8-14 GC – TOP LOCK NUT (USED IN BOLT KIT & FAN ASSY)
OEM Part: 281010
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
34 – #38322C1
Description: PULLEY – FAN (1844-635)
OEM Part: 1338322C1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
35 – #B38328C1
Description: BELT – FAN ROTOR, FRONT – 1844 (S/N JJC002462 & above), 2044, 2055, 2155, 2555, CPX420, CPX420 Tier III, CPX610, CPX620, 625, 635-REAR – (3 Band)
OEM Part: 1338328C1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
KIT.1 – #49982A1
Description: FRONT FAN KIT – ALL PARTS UNASSEMBLED, & # 09030 BOLT KIT (INCLUDES ITEMS #1-#34), MODELS 2555-635
OEM Part: 449982A1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
KIT.2 – #49982A1A
Description: FRONT FAN KIT – ALL PARTS ASSEMBLED, (INCLUDES ITEMS #1-#34), MODELS 2555-635
OEM Part: 449982A1
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp
KIT.3 – #09040
Description: BOLT KIT – COMPLETE FOR CNH REAR FAN KIT, 2555-635 (1.75 SHAFT)
OEM Part:
09040
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
Case / IH Rear Fan Assembly, 2555 (S.N.500) – 635
1 – #43038A2
Description: SIDE SUPPORT 4-BOLT REAR – 1.75 DIA SHAFT – 1 ON FRONT FAN – 2 ON REAR FAN
OEM Part: 243038A2
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
2 – #60066C2
Description: FAN 45DEGREE SIDE PANEL – NEW STYLE – LARGER TRANSITION NOTCH
OEM Part: 1260066C2
Section: Air System
Case /IH Rear Fan Assembly, 1822-2555 (S.N.499)
3 – #07515C1
Description: BAFFLE – PLASTIC BAFFLE OR ORIFICE
OEM Part: 207515C1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
4 – #04414C1
Description: BRACKET – HOUSING COVER TENSION BRACKET
OEM Part: 204414C1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
5 – #04415C1
Description: BRACKET – UNDER SHROUD TENSION BRACKET
OEM Part: 204415C1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
6 – #04416C1
Description: UNDER SHROUD – HOUSING COVER
OEM Part: 204416C1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
7 – #21533C1
Description: WRAP AROUND – HOUSING COVER
OEM Part: 221533C1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
8 – #10217P
Description: NUT – 1/4 – SERR HEX FLANGE
OEM Part: N10217
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
9 – #0043448P
Description: BOLT – 1/4 X 1/2″ CARRIAGE
OEM Part: 434-48
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
10 – #0434412P
Description: BOLT – 1/4 X 3/4″ CARRIAGE
OEM Part: 434-412
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
11 – #10213P
Description: NUT – 5/16 – SERR HEX FLANGE
OEM Part: 425-105
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
12 – #1311215P
Description: NUT – 5/16 – CENTER LOCK
OEM Part: 131-1215
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
13 – #0413528P
Description: BOLT – 5/16 X 1-3/4″ HEX HEAD
OEM Part: 413-528
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
14 – #11234P
Description: NUT – 3/8 – NYLON LOCK
OEM Part: 425-106
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
15 – #01565P
Description: BOLT – 3/8 X 3″ CARRIAGE
OEM Part: 433-648
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
16 – #01540P
Description: BOLT – 5/16 X 3/4″ CARRIAGE
OEM Part: 434-512
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
17 – #62120R1P
Description: CLASP – CABLE CLIP
OEM Part: 362120R1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
18 – #15020C1
Description: PIPE – HOUSING SPACER
OEM Part: 215020C1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
19 – #15709C1
Description: STUD
OEM Part: 215709C1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
20 – #2601346P
Description: SCREW – 8-18 X 3/8″ SELF-TAP
OEM Part: 260-1346
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
21.1 – #0281010P
Description: 7/8-14 GC – TOP LOCK NUT (USED IN BOLT KIT & FAN ASSY)
OEM Part: 281010
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
21.2 – #3246314P
Description: 7/8-14 GC – FLANGED – TOP LOCK NUT
OEM Part: 232-46314
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
22 – #9611094P
Description: WASHER – 1.75 X .937 X .13 HDN
OEM Part: 496-11094
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
23 – #0433832P
Description: BOLT – 1/2-13 X 1-3/4″ CARRIAGE
OEM Part: 433-832
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
24 – #42834A2
Description: 1-3/4″ BEARING ASSEMBLY
OEM Part: 242834A2
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
25 – #62934P
Description: NUT – 1/2 – SERR HEX FLANGE
OEM Part: E62934
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
26 – #0118001P
Description: KEY – 5/16 X 2-1/8WOODRUFF
OEM Part: 126-147
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
27 – #57206R1P
Description: 3/8 SQUARE KEY – 2-3/8 ” LONG
OEM Part: 657206R1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
28 – #05117A2
Description: REAR FAN SHAFT – CNH 1.75″ DIA
OEM Part: 405117A2
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
29 – #00250P
Description: COTTER PIN – 1/4 X 2-1/2″
OEM Part: 432-1636
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
30 – #9581092P
Description: WASHER – 2.50 X 1.78 X .06
OEM Part: 495-81092
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
31 – #43041A1
Description: FAN BLADE – 1.75″ ID – NEW STYLE
OEM Part: 243041A1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
32 – #43037A1
Description: SPACER – 1.75 ID CNH FAN SHAFT
OEM Part: 243037A1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
33 – #0433840P
Description: BOLT – 1/2-13 X 2-1/2″ CARRIAGE
OEM Part: 433-840
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
34 – #9581093P
Description: WASHER – 2.50 X 1.78 X .12
OEM Part: 495-81093
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
35 – #9611131P
Description: WASHER – 2.50 X 1.31 X .13 HDN
OEM Part: 396-11131
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
36 – #00927P
Description: NUT – 1-1/4-12 CASTLE
OEM Part: 25-1320
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
37 – #38322C1
Description: PULLEY – FAN (1844-635)
OEM Part: 1338322C1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
38 – #B46117C2
Description: BELT – FAN ROTOR – (3 Band) – 76.5″ (2055, 2155, 2555, CPX420, CPX420 Tier III, CPX610, CPX620) (Prior to S/N Y6T011701)
OEM Part: 1546117C2
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
KIT.1 – #50631A1
Description: REAR FAN KIT – ALL PARTS UNASSEMBLED, (INCLUDES ITEMS #1-#37) & #09040 BOLT KIT, MODELS 2555-635 – (DRIVE PULLEY #38 NOT IN KIT – NA)
OEM Part: 450631A1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
KIT.2 – #50631A1A
Description: REAR FAN KIT – ALL PARTS ASSEMBLED, (INCLUDES ITEMS #1-#37), MODELS 2555-635 – (DRIVE PULLEY #38 NOT IN KIT – NA)
OEM Part: 450631A1
Section: Air System
Case / IH Rear Fan Assembly, 2555(S.N.500)-635 Mod Exp
KIT.3 – #09030
Description: BOLT KIT – COMPLETE FOR CNH FRONT FAN KIT, 2555-635 (1.75 SHAFT)
OEM Part: 9030
Section: Air System
Case / IH Front Fan Assembly, 2555(S.N.500)-635 Mod Exp